Toyota Camry: Using the audio control function
■ Changing sound quality modes
Press .
Turn to select “SOUND”.
Press .
Turn to select the desired mode.
“BAS”, “TRE”, “FAD”, “BAL”, or “ASL” Press .
■ Adjusting sound quality
Turning adjusts the level.
*: The sound quality level is adjusted individually in each audio mode.
■ Adjusting the Automatic Sound Levelizer (ASL)
When ASL is selected, turn to select the desired mode.
Once the desired mode has been selected, press .
“ASL LOW”, “ASL MID”, “ASL HIGH”, or “ASL OFF” ASL automatically adjusts the volume and tone quality according to vehicle speed.
■Trademark owned by SRS Labs, Inc.
The audio systems utilize SRS FOCUS® and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.
FOCUS, TruBass, SRS and symbol are trademarks of SRS Labs, Inc.
FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.
TruBass® enhances the perception of bass frequencies to provide deep, rich bass response from any size speaker.
SRS FOCUS® raises the audio image from non-optimally placed speakers up to the natural listening height at ear level.
Optimal use of the audio system
Displays the current mode Changes the following setting • Sound quality and volume balance The sound quality and balance setting can be changed to produce the best sound. • ...Using the AUX port
This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Push the lid. Open the cover and connect the portable audio device. Press repe ...See also:
If No Steam Is Coming from
the Engine Compartment
If an engine overheat warning is
displayed but no steam can be seen
or heard, the problem might not be
too serious. Sometimes the engine
can get a little too hot when the
vehicle:
• Climb ...
Driving Position Memory System
U.S. V6 models, and Canadian EX-L and
V6 models with navigation system
Your vehicle has a memory feature
for the driver’s seat position.
Seat, except for power lumbar,
position can be stored ...
To Enter Remote Start Mode
Press and release the REMOTE START button
on the RKE transmitter twice within five seconds.
The parking lights will flash and the horn
will chirp twice (if programmed). Then, the
engine will ...