Volvo S60: Using HomeLink
To operate, simply press and release the programmed HomeLink button. Activation will now occur for the trained device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.). For convenience, the hand-held transmitter of the device may also be used at any time. In the event that there are still programming difficulties or questions, contact HomeLink at: www.homelink.com.
Programming HomeLink
NOTE
Some vehicles may require the ignition switch to be turned on or to the second
(“accessories”) position for programming and/or operation of HomeLink. It is also
recommended that a n ...
Erasing HomeLink Buttons
To erase programming from the three Home- Link buttons (individual buttons cannot
be erased but can be “reprogrammed” as outlined below), follow the step noted:
1. Press and hold the two outer ...
See also:
Setting the Time and Date
(With Date Display)
1. Press the CONFIG button and
select Time and Date Settings,
or press .
2. Select Set Time or Set Date.
3. Turn the Menu knob to adjust
the highlighted value.
4. Press SELECT to select the n ...
Changing engine oil
1. Park the vehicle on a level surface and apply the parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn the engine off and wait more than 10 minutes ...
Problems with your vehicle
If you should experience a problem with your
vehicle, particularly one that you believe may
affect its safe operation, we urge you to
contact an authorized Mercedes-Benz Center
immediately to h ...
