Subaru Legacy: Towing with all wheels on the ground
WARNING
● Never turn the ignition switch to the “LOCK” position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked.
● Remember that the brake booster and power steering do not function when the engine is not running. Because the engine is turned off, it will take greater effort to operate the brake pedal and steering wheel.
CAUTION
● If transmission failure occurs, transport your vehicle on a flatbed truck.
● Do not run the engine while being towed using this method. Transmission damage could result if the vehicle is towed with the engine running.
● For AT and CVT models, the traveling speed must be limited to less than 20 mph (30 km/h) and the traveling distance to less than 31 miles (50 km). For greater speeds and distances, transport your vehicle on a flat-bed truck.
1. Release the parking brake and put the transmission in neutral.
2. The ignition switch should be in the “Acc” position while the vehicle is being
towed.
3. Take up slack in the towline slowly to prevent damage to the vehicle.
Using a flat-bed truck
This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation. 1. Shift the select lever into the “P” position for AT and CVT models or the shif ...Electronic parking brake – if the electronic parking brake cannot be released
WARNING ● When the electronic parking brake cannot be released, the electronic parking brake system may malfunction. Driving in such conditions may cause an unexpected accident. Contact you ...See also:
Accessories and Modifications
Modifying your vehicle, or installing
some non-Honda accessories, can
make your vehicle unsafe. Before
you make any modifications or add
any accessories, be sure to read the
following inform ...
Shift lock release using the shift lock release button
Perform the following procedure to release the shift lock.
1. Apply the parking brake and stop the engine.
2. Remove the shift lock cover using a flat-head screwdriver.
3. While depressing the ...
Overdrive Operation
The automatic transmission includes an electronically
controlled Overdrive (fourth gear). The transmission will
automatically shift into the Overdrive gear if the following
conditions are presen ...