Toyota Camry: Headlight switch
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows:
U.S.A. (type A)
The daytime running lights turn on.
The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on.
The headlights and all the lights listed above (except daytime running lights) turn on.
The daytime running light turns off.
U.S.A. (type B)
Vehicles without a smart key system: The headlights and parking lights, daytime running lights turn on and off automatically (when the engine switch is in the “ON” position).
Vehicles with a smart key system: The headlights, parking lights, daytime running lights and so on turn on and off automatically (when the “ENGINE START STOP” switch is in IGNITION ON mode).
The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on.
The headlights and all the lights listed above (except daytime running lights) turn on.
The daytime running lights turn off.
Canada
Vehicles without a smart key system: The headlights, parking lights, daytime running lights and so on turn on and off automatically (when the engine switch is in the “ON” position).
Vehicles with a smart key system: The headlights, parking lights, daytime running lights and so on turn on and off automatically (when the “ENGINE START STOP” switch is in IGNITION ON mode).
The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on.
The headlights and all the lights listed above (except daytime running lights) turn on.
The daytime running lights turn on.
- Turning on the high beam headlights
- Manual headlight leveling dial (if equipped)
- Guide to dial settings
- Daytime running light system
- Headlight control sensor (if equipped)
- Automatic light off system (if equipped)
- Light reminder buzzer
- Battery-saving function
- Customization that can be configured at Toyota dealer
Turning on the high beam headlights
1 With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
2 Pull the lever toward you a ...
See also:
Tilting the moonroof
Close the moonroof by pushing the switch
toward 2 . Release the switch,
then push
the switch toward 2 again to tilt
the
moonroof up.
To tilt the moonroof down, push the switch
toward 1 .
...
Air conditioning odors
●During use, various odors from inside and outside the vehicle may enter
into and accumulate in the air conditioning system. This may then cause
odor to be emitted from the vents.
●To ...
Entry/exit function
This system is designed so that the drivers seat and automatic operation steering
column will automatically move when the shift selector is in the P (Park) position.
This allows the driver to get ...
