Chrysler 200: Lights
- Multifunction Lever
- Headlights And Parking Lights
- Automatic Headlights — If Equipped
- Headlight Time Delay
- Turn Signals
- Lane Change Assist
- High/Low Beam Switch
- Flash-To-Pass
- Fog Lights — If Equipped
- Daytime Running Lights — If Equipped
- Lights On Reminder
- Instrument Panel Dimmer
- Map/Reading/Interior Lights
To Open And Close The Hood
To open the hood, two latches must be released.
1. Pull the hood release lever located under the left side
of the instrument panel.
Hood Release Lever
2. Then lift the secondary latch located u ...
Multifunction Lever
The multifunction lever controls the operation of the
parking lights, headlights, headlight beam selection,
passing light, fog lights, instrument panel light dimming
and turn signals. The multif ...
See also:
To decrease the speed (by the “RES/SET” switch)
Press the “RES/SET” switch to the “SET” side and hold it until the vehicle reaches
the desired speed. Then, release the switch. The vehicle speed at that moment will
be memorized and tre ...
Tire labeling
Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed
on the sidewall of a tire by tire manufacturers. These marking can provide you with
useful information on the tire. ...
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire
Do this by checking the air pressure in all
four tires.
If the tire inflation pressure in all four tires is
correct, the Flat Tire Monitor may not have ...
