Subaru Legacy: To decrease the speed (by the “RES/SET” switch) - To change the cruising speed - Cruise control - Starting and operating - Subaru Legacy Owners ManualSubaru Legacy: To decrease the speed (by the “RES/SET” switch)

Press the “RES/SET” switch to the “SET” side and hold it until the vehicle reaches

Press the “RES/SET” switch to the “SET” side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as the new set speed.

U.S.-spec. models

When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be lowered 1 mph (1.6 km/h) each time by pressing the “RES/SET” switch to the “SET” side quickly.

Canada-spec. models

When the difference between the actual vehicle speed and the set speed is less than 4.4 km/h, the set speed can be lowered 1 km/h each time by pressing the “RES/SET” switch to the “SET” side quickly.

    To increase the speed (by accelerator pedal)
    1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Press the “RES/SET” switch to the “SET” side once. Now the desired speed is set and the vehicle will keep ...

    To decrease the speed (by brake pedal)
    1. Depress the brake pedal to release cruise control temporarily. 2. When the speed decreases to the desired speed, press the “RES/SET” switch to the “SET” side once. Now the desired speed ...

    See also:

    Panic alarm
    •► To activate: press button 1 for at least one second. An alarm sounds and the exterior lighting flashes. •► To deactivate: press button 1 again. or •► ...

    Malfunction
    A Check Control message is displayed. The parking assistant failed. Have the system checked. ...

    Hood and engine compartment
    Turn the handle located under the left side of the dash approximately 20-25 degrees clockwise to release the hood lock. Lift the hood slightly. Press the release control (located under the r ...