Mercedes-Benz E-Class: Important safety notes
WARNING
When opening or closing the door windows,
make sure that there is no danger of anyone
being harmed by the opening/closing
procedure.
The door windows are equipped with automatic operation and the anti-entrapment feature. If in automatic mode a door window encounters an obstruction that blocks its path, the anti-entrapment feature will stop the door window and open it slightly.
The door windows operate differently when the switch is pulled. See the "Problems with door windows" section for details.
The closing of the door windows can be immediately halted by releasing the switch or, if the switch was pulled past the resistance point and released, by either pressing or pulling the respective switch.
If a door window encounters an obstruction
that blocks its path in a circumstance where
you are closing the windows by pressing and
holding the 
button on the SmartKey
or
by pressing and holding the lock button
(vehicles with KEYLESS-GO) on an outside
door handle, the anti-entrapment feature will
not operate.
Activate the override switch when children are riding in the back seats of the vehicle. The children may otherwise injure themselves, e.g. by becoming trapped in the door window opening.
WARNING
Do not keep any part of your body up against
the window pane when opening a window. The
downward motion of the pane may pull that
part of your body down between the window
pane and the door frame and trap it there. If
there is a risk of entrapment, release the
switch and pull it to close the window.
Side windows
...
Opening and closing the side
windows
1. Front left
2. Front right
3. Rear right
4. Rear left
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding ...
See also:
To open and close the hood
To open the hood, two latches must be released.
1. Pull the hood release lever located under the left sideof the instrument panel.
Hood Release Lever
2. Lift the secondary latch located under the ...
Condition Based Service CBS
Sensors and special algorithms take into account
the driving conditions of your vehicle.
Based on this, Condition Based Service determines
the maintenance requirements.
The system makes it possi ...
Vents
Center
Adjust air flow direction by moving the vent slides.
Open or close the vents by using the dial. Move the dial toward the
to open the vents or toward the
to close them.
Side ...
