Subaru Legacy: Vehicle Dynamics Control OFF indicator light
The light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. The light illuminates when the Vehicle Dynamics Control OFF switch is pressed to deactivate the Vehicle Dynamics Control system.
The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately.
● The light does not illuminate when the ignition switch is turned to the “ON” position.
● The light does not turn off even after a period of approximately 2 seconds after the ignition switch has been turned to the “ON” position.
Vehicle Dynamics Control operation indicator light
The indicator light flashes during activation of the skid suppression function
and during activation of the traction control function.
NOTE
● The light may remain illuminated for a short per ...
Security indicator light
This indicator light shows the status of the alarm system. It also indicates
operation of the immobilizer system. ...
See also:
Audio Control Switch Operation
When the audio unit is turned on, operation of the audio unit from the steering
wheel is possible.
NOTE:
Because the audio unit will be turned off under the following conditions, the
switches wi ...
High-beam headlamps
•► To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
•► Turn the light switch to
or .
•► Press the combin ...
Floor Mats
WARNING!
If a floor mat is the wrong size or
is not properly installed, it can
interfere with the pedals.
Interference with the pedals can
cause unintended acceleration
and/or increased stop ...
