Volvo S60: Using voice commands
The driver initiates a voice command dialogue by pressing the voice control button (see the illustration on page 240).
When a dialogue has been initiated, commonly used commands will be shown in the display. Grayed-out texts or texts in parentheses are not part of the spoken command.
Once you become familiar with the system, you can speed up the command dialogue by briefly pressing the voice control button to skip prompts from the system.
Commands can be given in several ways.
For example, the command "Phone call contact" can be spoken as:
- "Phone > Call contact"—say "Phone," wait for a system response, and then continue by saying "Call contact."
- "Phone call contact"—give the entire command at one time
The following is a list of features that can be voice-controlled with a Bluetooth-connected cell phone.
Other voice control settings found in MY CAR
Voice user setting: Two user profiles can be set by pressing MY CAR and
going to Settings Voice settings Voice user setting. Select User 1 or User 2.
Voice output volume: Press MY CAR and go t ...
Shortcuts
Shortcut commands for using the phone can be found in the MY CAR menu system,
under Settings Voice settings Voice command list Phone commands and General commands.
See page 133 for more informatio ...
See also:
Turn Signals when Towing a
Trailer
The turn signal indicators on the
instrument panel flash whenever
signaling a turn or lane change.
Properly hooked up, the trailer
lamps also flash, telling other
drivers the vehicle is turni ...
Check TPMS Warning
When a system fault is detected, a chime will sound and
the “Tire Pressure Monitoring Telltale Light” will flash on
and off for 75 seconds and then remain on solid. In
addition, the EVIC wil ...
Pair (Link) Uconnect™ Phone To A Mobile Phone
To begin using your Uconnect™ Phone, you must pair
your compatible Bluetooth enabled mobile phone.
To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual ...
