Subaru Legacy: Transmission control system warning - AT OIL TEMP warning light (AT and CVT models) - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Transmission control system warning

If the “AT OIL TEMP” warning light flashes after the engine has started, it may indicate that the transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately.

    AT OIL TEMP warning light (AT and CVT models)
    The AT oil temperature warning light “AT OIL TEMP” illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. If this light illuminate ...

    Low tire pressure warning light (U.S.-spec. models)
    When the ignition switch is turned to the “ON” position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring system (TP ...

    See also:

    Front passenger’s seat (if equipped)
    1) Seat position forward/backward control switch To adjust the seat forward or backward, move the control switch forward or backward. 2) Seatback angle (reclining) control switch To adjust the an ...

    Recommended cold tire inflation pressures
    All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1. ...

    Antenna
    Window antenna The antenna pattern is printed inside the rear window. CAUTION: - Do not place metalized film near the rear window glass or attach any metal parts to it. This may cause poor recept ...