Toyota Camry: The Blind Spot Monitor will detect a vehicle when
●A vehicle in an adjacent lane overtakes your vehicle.
●Another vehicle enters the vehicles detection area when it changes lanes.
The Blind Spot Monitor is operational when
The BSM main switch is set to on and vehicle speed is greater than about 25 mph (40 km/h) ...Conditions under which the Blind Spot Monitor will not detect a vehicle
The Blind Spot Monitor is not designed to detect the following types of vehicles and/or objects: ●Vehicles traveling from the opposite direction ●Small motorcycles, bicycles, pedestr ...See also:
Jump-Starting
If your vehicle has a discharged battery it can be jumpstarted
using a set of jumper cables and a battery in
another vehicle or by using a portable battery booster
pack. Jump-starting can be dan ...
Seat belt
Problem
Possible causes/consequences and •► Solutions
After starting the
engine, the red seat
belt warning lamp lights
up for six seconds.
The seat belt warning lamp re ...
Electric power steering (EPS)
The power steering uses a motor to assist you in steering the vehicle. If the
engine is off or if the power steering system becomes inoperative, the vehicle may
still be steered, but it will requi ...