Nissan Maxima: System operation
The automatic drive positioner system will not work or will stop operating under the following conditions:
- When the vehicle speed is above 4 MPH (7 km/h).
- When any of the memory switches are pushed while the automatic drive positioner is operating.
- When the adjusting switch for the drivers seat is turned on while the automatic drive positioner is operating.
- When the seat has been already moved to the memorized position.
- When no seat position is stored in the memory switch.
- When the shift selector is moved from P (Park) to any other position.
- When the drivers door remains open more than 45 seconds and the ignition switch is not in the ON position.
The automatic drive positioner system can be adjusted and canceled for vehicles with navigation system. See Comfort & Convenience settings in the Monitor, climate, audio, phone and voice recognition systems section of this manual.
Entry/exit function
This system is designed so that the drivers seat and automatic operation steering
column will automatically move when the shift selector is in the P (Park) position.
This allows the driver to get ...
See also:
Light bulbs
You may replace the following bulbs by yourself. The difficulty level
of replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact your Toyota dea ...
Setting Cruise Control
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control switch off when cruise
is not being used.
1. Press to turn the cr ...
To Turn Everything Off
To turn the system completely off,
press the ON/OFF button.
Keep the system completely off
for short periods only.
To keep stale air and mustiness
from collecting, you should have
the fan ru ...
