Volvo S60: Switching BLIS on and off
BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times.
- The system can be switched off by pressing the BLIS button in the center console (see the illustration). The indicator light in the button goes out when the system is switched off, and a text message is displayed.
- BLIS can be switched on again by pressing the button. The indicator light in the button will illuminate and a new text message will be displayed. Press the READ button (see page 131) to erase the message.
Depending on the vehicle's optional equipment, there may not be space for the BLIS button in the center console. In this case, BLIS can be switched on and off in the menu system by pressing MY CAR and going to Settings Car settings BLIS. See page 134 for a description of the menu system.
Cleaning the BLIS camera lenses
In order to function optimally, the BLIS camera lenses must be kept clean. They
can be wiped clean with a soft cloth or wet sponge.
CAUTION
Clean the lenses carefully to avoid scratching.
The ...
See also:
Cooling System
To reduce potential for engine and transmission overheating,
take the following actions:
• City Driving
When stopped for short periods of time, shift the transmission
into NEUTRAL and increase ...
Tire pressure loss warning system
(Canada only)
Important safety notes
While the vehicle is in motion, the tire
pressure loss warning system monitors the
set tire pressure using the rotational speed of
the wheels. This enables the system to ...
ON
This is the normal operating position after the engine is started. ...
