Toyota Camry: Starting the engine - Engine (ignition) switch (vehicles with a smart key system) - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: Starting the engine

set. Check that the parking brake is set.

set in P. Check that the shift lever is set in P.

If the shift lever is not set in P, the engine may not be started.

The smart key system indicator light (green) will turn on. If the Firmly depress the brake pedal.

The smart key system indicator light (green) will turn on. If the indicator light does not turn on, the engine cannot be started.

Press the “ENGINE START

Press the “ENGINE START STOP” switch.

The engine will crank until it starts or for up to 30 seconds, whichever is less.

Continue depressing the brake pedal until the engine is completely started.

The engine can be started from any “ENGINE START STOP” switch mode.

    Engine (ignition) switch (vehicles with a smart key system)
    Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ...

    Stopping the engine
    Stop the vehicle. Shift the shift lever to P. Set the parking brake. Release the brake pedal. Press the “ENGINE START STOP” switch. Check that the smart key system indicator light (gr ...

    See also:

    Specifications
    These specifications are subject to change without notice. ...

    Programming the HomeLink®
    Point the remote control transmitter for the device 1 to 3 in. (25 to 75 mm) from the HomeLink® control buttons. Keep the HomeLink® indicator light in view while programming. Press and ...

    Definition of terms for tires and loading
    Tire ply composition and material used Describes the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. These are made of steel, nylon, polyester ...