Volvo S60: Selecting a channel
There are three ways of tuning in a channel:
- Using the left and right arrow keys to go to the next channel. Skipped channels (see page 220) will be excluded.
- By turning the TUNE control and selecting a channel from the list
- Through direct channel entry.
NOTE
- The numbers of skipped or locked channels will not be displayed.
- If a channel is locked, the access code must be entered before the channel can be selected. See "Unlocking a channel" on page 220.
Selecting a channel category
1. Turn TUNE to display a list of channels. 2. Press EXIT. 3. Turn TUNE to scroll through the list of categories and press OK/MENU to make a selection. > The channels in the selected category ...Direct channel entry
The Sirius satellite channels are in numerical order throughout all of the categories. To access a channel directly: 1. Turn TUNE to access the channel list. 2. Use the number key buttons to enter ...See also:
Automatic Transmission
The automatic transmission and differential assembly are
contained within a single housing.
The fluid level in the automatic transmission should be
checked whenever the vehicle is serviced. Opera ...
Downloading destinations in COMAND
Information on the components and
operating principles of COMAND can be
found in the separate COMAND operating
instructions.
You can only use the Destination
Download function if the vehicle ...
Windshield wiper blade assembly
1. Raise the wiper arm off the windshield.
1) Open the cover
2) Pull down the wiper blade
2. Remove the wiper blade assembly by opening the cover and pulling it down in
the direction shown in t ...