Mercedes-Benz E-Class: Resetting the side windows
You must reset each side window if a side window can no longer be closed fully.
•► Close all the doors.
•► Turn the SmartKey to position 1 or 2 in the ignition lock.
•► Pull the corresponding switch on the door control panel until the side window is completely closed.
•► Hold the switch for an additional second.
If the side window opens again slightly:
•► Immediately pull the corresponding switch on the door control panel until the side window is completely closed.
•► Hold the switch for an additional second.
•► If the corresponding side window remains closed after the button has been released, the side window has been reset correctly.
If this is not the case, repeat the steps above again.
Using KEYLESS-GO
The KEYLESS-GO key must be outside the vehicle. All the doors must be closed. •► Touch recessed sensor surface 1 on the door handle until the side windows and the sliding sunroof or t ...Problems with the side windows
Problem: a side window cannot be closed because it is blocked by objects, e.g. leaves in the window guide. •► Remove the objects.•► Close the side window. Problem: a side window c ...See also:
Hands-Free Setting
Device
Device registration
For the registration of a Bluetooth equipped device to Bluetooth Hands-Free,
refer to “Bluetooth Hands-Free preparation”.
Registered device read-out
Bluetooth Hand ...
Menu Display
To select any setting such as the
clock, sound adjusting, or the
compass (if equipped), press the
MENU button. To use any audio
system function, the ignition switch
must be in the ACCESSORY ...
If the HUD Image Is Not Clear
• Is the HUD image too bright?
• Are the windshield and HUD
lens clean?
If the HUD image is not correct,
contact your dealer.
Keep in mind that the windshield is
part of the HUD system. ...