Nissan Altima: Resetting the moonroof switch
The moonroof switch may not operate properly and need to be reset if any of the following conditions have occurred:
● the moonroof has been manually moved,
● the moonroof motor has been removed and
reinstalled after the moonroof has been repositioned
or adjusted,
● the moonroof glass panel has been adjusted
or changed, or
● the electrical supply interrupted and/or
some malfunction has been detected.
Use the following reset procedure to return the moonroof operation to normal.
1. Place the ignition switch in the ON position.
2. Push and hold the moonroof switch
toward 2 . Once the moonroof has
reached the full tilt position, release the
switch. Push and hold the switch toward
the 2 position again. After a delay of
four seconds, the moonroof will make a small
movement and backup.
3. Release the switch.
4. Within 5 seconds of releasing the switch,
push and continuously hold the switch
toward 2 . The moonroof will move
from the tilt position to the open position and
back to the close position.
NOTE:
If the switch is released at any time during Step 4, the procedure must be restarted.
5. Release the switch. Do not place the ignition switch in the OFF position for at least 2 seconds. The moonroof is now reset. If the moonroof still does not operate properly, have the moonroof system checked by a NISSAN dealer.
Tilting the moonroof
Close the moonroof by pushing the switch toward 2 . Release the switch, then push the switch toward 2 again to tilt the moonroof up. To tilt the moonroof down, push the switch toward 1 . ...Auto-reverse function (when closing or tilting down the moonroof)
The auto-reverse function can be activated when the moonroof is closed or tilted down by automatic operation when the ignition switch is placed in the ON position or for about 45 seconds after the ...See also:
Massage function (PULSE)
The massage function helps you to prevent
muscle tension on long journeys. You can
choose between two levels.
•► To switch on: press button 4 once or
twice until the desired level is se ...
Switching on/off
Press the button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The system can issue warnings at speeds above
approx. 30 mph/50 km/h.
The state is stored for the remote contro ...
Bottle holders
Front
Rear
■When using the holder as a bottle holder
●When storing a bottle, close the cap.
●The bottle may not be stored depending on its size or shape.
CAUTION
■It ...