Honda Accord: Replacing a Front Turn Signal/Parking Light Bulb
1. Open the hood.
To change the turn signal bulb on the passenger’s side, remove the engine coolant reserve tank by pulling it out of its stay.
Driver’s side on V6 models
Remove the air intake duct.
2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
3. To remove the burned out bulb, push it in and turn it counterclockwise until it unlocks.
4. Install the new bulb and turn it clockwise to lock it in place.
5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.
6. Turn on the lights to make sure the new bulb is working.
7. Passenger’s side
Reinstall the coolant reserve tank.
Driver’s side on V6 models
Reinstall the air intake cover and duct securely. Reinstall the fastener and secure it by pushing on the head until it locks.
Replacing a Headlight Bulb
Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it wi ...Replacing a Front Side Marker Light Bulb
1. To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger’s side, tu ...See also:
Battery
If the battery is not fully charged during extremely cold weather conditions,
the battery fluid may freeze and damage the battery. To maintain maximum efficiency,
the battery should be checked reg ...
3. Exhaust emission control system
The Exhaust Emission Control System is a highly effective system which controls
exhaust emissions while maintaining good vehicle performance.
Vehicle modifications
This vehicle should not be modif ...
Tripped sensor identification
The security indicator light flashes when the alarm system has been triggered.
Also, the number of flashes indicates the location of unauthorized intrusion or
the severity of impact on the vehicle ...