Ford Fusion: Rear window wiper and washers
Intermittent wiping
Pull the lever towards the steering wheel.
Reverse gear wipe
The rear wiper will be activatedautomatically when selecting reverse gear, if
• the rear wiper is not already switched on,
• the wiper lever is in position C, or D
• in position B and the front wipers are operating.
The rear wiper will follow the front wiperinterval (at intermittent or normal speed).
Washer
WARNING:
Do not operate the washer for morethan 10 seconds at a time, andnever when the reservoir is empty.
Pull the lever fully towards the steeringwheel and hold it to operate the washer.
The washer will operate in conjunctionwith the wipers.
The washer jet for the rear window islocated on the roof above the rearwindow.
Windscreen washers
Windscreen washers WARNING: Do not operate the windscreenwasher for more than 10 secondsor when the reservoir is empty. ...Adjusting the windscreen washer jets
Adjusting the windscreen washer jets The eye ball jets can be adjusted preciselyusing a pin. ...See also:
Using voice commands
The driver initiates a voice command dialogue by pressing the voice control button
(see the illustration on page 240).
When a dialogue has been initiated, commonly used commands will be shown in th ...
Towing a trailer
WARNING:
Overloading or improper loading of a trailer and its cargo can adversely affect
vehicle handling, braking and performance and may lead to accidents.
CAUTION:
- Do not tow a trailer or ha ...
Programming A Non-Rolling Code
For programming Garage Door Openers manufactured
before 1995.
1. Turn the ignition switch to the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
away from the HomeLink ...