Mercedes-Benz E-Class: Program selector button - Automatic transmission - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Program selector button

General information

The program selector button allows you to choose between different driving characteristics.

Program selector button on all models except AMG

Program selector button on all models except AMG vehicles

For further information on the automatic

For further information on the automatic drive program

•► Press program selector button :

repeatedly until the letter for the desired gearshift program appears in the multifunction display.

The automatic transmission shifts to automatic drive program E each time the engine is started.

AMG vehicles

Drive program selector with manual drive program

Drive program selector with manual drive program

 
 For further information on the automatic

For further information on the automatic drive program

Only change from automatic drive program C, S or S+ to manual drive program M when the vehicle is stationary.

•► Turn drive program selector 1 until the desired drive program appears in the multifunction display in the speedometer.

The drive program indicator on drive program selector 1 lights up in red.

The automatic transmission shifts to automatic drive program C each time the engine is started.

RS cannot be selected during normal driving. For further information on RACE START

    Driving tips
    AMG vehicles When shifting down, the double-clutch function is active regardless of the currently selected drive program. The double-clutch function reduces load change reactions and is condu ...

    Steering wheel paddle shifters
    1. Left-hand steering wheel paddle shifter 2. Right-hand steering wheel paddle shifter You can restrict or derestrict the shift range by using the steering wheel paddle shifters. You can cha ...

    See also:

    Satellite Radio
    To switch to satellite radio mode, say “Sat” or “Satellite Radio”. In this mode, you may say the following commands: • “Channel Number” (to change the channel by its spoken number) ...

    Backup Lamps
    1. Open the trunk and gently pull back the trunk liner behind the tail lamp (requires removal of a push pin holding the trunk trim in place near the tail lamp). 2. Remove the two plastic wing nut ...

    Before entering vehicle
    • Be sure that all windows, outside mirror( s), and outside lights are clean. • Check the condition of the tires. • Check under the vehicle for any sign of leaks. • Be sure there are no obs ...