Subaru Legacy: Photosensors
The mirror has a photosensor attached on the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you and automatically dim the mirror to eliminate glare and preserve your vision. For this reason, use care not to cover the sensors with stickers, or other similar items. Periodically wipe the sensors clean using a piece of dry soft cotton cloth or an applicator.
Auto-dimming mirror with compass (if equipped)
1) LED 2) Switch 3) Sensor 4) Compass display The auto-dimming mirror has an anti-glare feature which automatically reduces glare coming from headlights of vehicles behind you. It also contain ...Compass zone adjustment
Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the ...See also:
Seat belts
Seat belt restraint system
WARNING:
• For maximum restraint system protection, the seat belts must always be used
whenever the car is moving.
• Seat belts are most effective when seatbacks ar ...
Turning ACC off completely
From standby mode, press once.
From active mode, press twice.
The set speed and time interval are then cleared from the system's memory and
cannot be resumed by pressing . ...
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filter changes are requir ...