Chrysler 200: NEUTRAL - Gear Ranges - Automatic Transmission - Starting and operating - Chrysler 200 Owners ManualChrysler 200: NEUTRAL

Use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Set the parking brake and shift the transmission into PARK if you must leave the vehicle.

WARNING!
Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision.

CAUTION!
Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in What To Do In Emergencies” for further information.

    REVERSE
    This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. ...

    DRIVE
    This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy. The transmission automatically upshifts through all for ...

    See also:

    When the Light Is On Steady
    This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Vehicle Messages for more informati ...

    Windshield-washer fluid
    Fill the windshield-washer fluid reservoir periodically. Add windshield-washer fluid when the low windshield-washer fluid warning light comes on. To fill the windshield-washer fluid reservoir, li ...

    Heated front seats
    The current seat temperature is shown in the center console display Press the button once for the highest heat level – three indicator lights come on. Press the button twice for a lower heat ...