Hyundai Sonata: Mode selection
The mode selection button controls the direction of the air flow through the ventilation system.
The air flow outlet port is converted as follows:
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Air flow is directed towards the face and the floor.
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position. To improve the effectiveness of heating
and cooling :
- Heating:
- Cooling:
3. Set the temperature control to the desired position. ...
MAX A/C-Level (B, D)
To operate the MAX A/C, turn the temperature knob to extreme left. Air flow is
directed toward the upper body and face. In this mode, the air conditioning and
the recirculated air position will ...
See also:
Voice command system
Talk switch
To turn on the voice command system, press the talk switch
briefly. To turn off the voice command
system, press the talk switch for more
than 1.5 seconds.
The commands available ...
Dolly Towing from the Front
(All-Wheel Drive)
Dolly Towing from the Front
(All-Wheel Drive)
Vehicles with all-wheel drive cannot
be dolly towed. ...
Load anchoring eyelets
The load anchoring eyelets on both sides of the vehicle are used to fasten straps,
etc., to help anchor items in the trunk.
WARNING
Cover sharp edges on long loads to help prevent injury ...
