Chrysler 200: Manual Front Seat Adjustment
The manual seat adjustment bar is at the front of the seat, near the floor.
Manual Seat Adjusting Bar
Pull the bar upward to move the seat forward or rearward.
Release the bar once the seat is in the position desired. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
WARNING!
Adjusting a seat while the vehicle is moving is
dangerous. The sudden movement of the seat could
cause you to lose control. The seat belt might not be
properly adjusted and you could be injured. Adjust
the seat only while the vehicle is parked.
Heated Seats — If Equipped
There are two heated seat switches that allow the driver
and passenger to operate the seats independently. The
controls for each heater are located on the center of the
instrument panel (above t ...
Driver Seat Manual Height Adjuster — If Equipped
A lever style height adjustment feature enhances comfort
for petite as well as tall drivers. A lever with a ratcheting
mechanism, located on the outboard side of the seat,
raises and lowers it. ...
See also:
Variable voltage control system
CAUTION:
- Do not ground accessories directly to the battery terminal. Doing so will bypass
the variable voltage control system and the vehicle battery may not charge completely.
- Use electrica ...
Turning a Function On or Off
1. Turn the Menu knob to highlight
the function.
2. Press SELECT to turn the
function on or off. ...
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Pull the head restraint upward as far as possible.
2. Press the button, arrow 1, and pull the head
restrain ...
