Nissan Altima: Locking doors - How to use the remote keyless entry
function - Request Switches - Pre-driving checks and adjustments - Nissan Altima Owners ManualNissan Altima: Locking doors

1. Place the ignition switch in the LOCK position.

1. Place the ignition switch in the LOCK position.
2. Close all doors.
3. Press the Intelligent button on the Intelligent Key.
4. The hazard warning lights flash twice and the horn beeps once.
5. All doors will be locked.

CAUTION

After locking the doors using the Intelligent Key, be sure that the doors have been securely locked by operating the door handles.

    How to use the remote keyless entry function
    The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key. The remote keyless function can operate at a distance of 33 ft (10 m) away fr ...

    Unlocking doors
    1. Press the button on the Intelligent Key. 2. The hazard warning lights flash once. 3. Press the button again within 5 seconds to unlock all doors. All doors will be locked automatically ...

    See also:

    Push starting
    CAUTION ● Do not push start this vehicle. The three-way catalyst may be damaged. ● Continuously Variable Transmission (CVT) models cannot be push-started or tow-started. Attempting to ...

    Three-Way Calling
    Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press . 2. Say “Three-way call.”. 3. Use the dial or call command to ...

    Engine Coolant Check
    Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant  for information on adding ...