Toyota Camry: Inspection and adjustment procedure
- Tire valve
- Tire pressure gauge
- Remove the tire valve cap.
- Press the tip of the tire pressure gauge onto the tire valve.
- Read the pressure using the gauge gradations.
- If the tire inflation pressure is not at the recommended
level, adjust the pressure.
If you add too much air, press the center of the valve to deflate. - After completing the tire inflation pressure measurement and adjustment, apply soapy water to the valve and check for leakage.
- Put the tire valve cap back on.
Tire inflation pressure
The recommended cold tire inflation pressure and tire size are
displayed on the tire and loading information label.
...
Tire inflation pressure check interval
You should check tire inflation pressure every two weeks, or at least
once a month.
Do not forget to check the spare. ...
See also:
Headlight, position light, turn signal light, side marker light and front fog
light bulb replacement
(1) Headlight (High) (2) Headlight (Low) (3) Front turn signal light / Position
light (4) Front fog light (if equipped)
Headlight bulb
WARNING - Halogen bulbs
• Halogen bulbs contain pressu ...
General information
WARNING:
Do not operate the informationdisplay controls when the vehicle ismoving.
Note: The information display will remainon for several minutes after you switch offthe ignition.
Note: If Sh on o ...
Safety Certification
This CD player is made and tested to meet exacting safety standards. It meets
FCC requirements and complies with safety performance standards of the U.S. Department
of Health and Human Services.
...
