Buick LaCrosse: If the Off Indicator Is Lit for an 
Adult-Size Occupant - Passenger Sensing System - Airbag System - Seats and Restraints - Buick LaCrosse Owners ManualBuick LaCrosse: If the Off Indicator Is Lit for an Adult-Size Occupant

If a person of adult-size is sitting in

If a person of adult-size is sitting in the front outboard passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. Use the following steps to allow the system to detect that person and enable the front outboard passenger frontal airbag :

1. Turn the vehicle off.

2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers.

3. Place the seatback in the fully upright position.

4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended.

5. Restart the vehicle and have the person remain in this position for two to three minutes after the on indicator is lit.

    If the On Indicator Is Lit for a Child Restraint
    If a child restraint has been installed and the on indicator is lit: 1. Turn the vehicle off. 2. Remove the child restraint from the vehicle. 3. Remove any additional items from the seat such ...

    Additional Factors Affecting System Operation
    Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Saf ...

    See also:

    Programming a Rolling Code system (for U.S. owners)
    If your device is Rolling Code equipped, follow the steps under the heading “Programming HomeLink®” before proceeding with the steps listed below. Locate the learn button on the ceiling m ...

    Tire inspection
    Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. Contact your SUBARU dealer immediately if you find any pr ...

    Setting a time interval
    Controls and display 3 - Time interval: Increase/decrease 6 - Time interval: On, while it is being set 7 - Time interval: On, after it has been set Press to increase the interval or to decrea ...