Nissan Maxima: How to use the remote keyless entry function

Nissan Maxima: How to use the remote keyless entry function - Pre-driving checks and adjustments - Nissan Maxima A35 (2009-2014) Owners ManualNissan Maxima: How to use the remote keyless entry function

The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key. The remote keyless function can operate at a distance of 33 ft (10 m) away from the vehicle. The operating distance depends upon the conditions around the vehicle.

The remote keyless entry function will not function under the following conditions:

- When the Intelligent Key is not within the operational range.

- When the doors or the trunk are open or not closed securely.

- When the Intelligent Key battery is discharged.

CAUTION:

When locking the doors using the Intelligent Key, be sure not to leave the key in the vehicle.

 Locking doors

 Locking doors

1. Place the ignition switch in the LOCK position.

2. Close all doors.

3. Press the Key. button on the Intelligent Key.

4. The hazard warning lights flash twice and the horn beeps once.

5. All doors will be locked.

CAUTION:

After locking the doors using the Intelligent Key, be sure that the doors have been securely locked by operating the door handles.

 Unlocking doors

 Unlocking doors

1. Press the Key.button on the Intelligent Key.

2. The hazard warning lights flash once.

3. Press the 60 seconds to unlock all doors. button again within 60 seconds to unlock all doors.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pressing the - Opening any doors. button.

- Opening any doors.

- Pushing the ignition switch.

The interior light illuminates for a maximum of 30 seconds when a door is unlocked and the room light switch is in the DOOR position.

The light can be turned off without waiting for 30 seconds by performing one of the following operations.

- Placing the ignition switch in the ON position.

- Locking the doors with the remote controller.

- Switching the room light switch to the OFF position.

Opening windows

The Intelligent Key allows you to open windows equipped with automatic operation simultaneously.

- To open the windows, press the on the Intelligent Key for longer than 3 seconds after all doors are unlocked.button on the Intelligent Key for longer than 3 seconds after all doors are unlocked.

The door windows will open while pressing the The door windows cannot be closed by using the Intelligent Key. button on the Intelligent Key.

The door windows cannot be closed by using the Intelligent Key.

 Releasing the

 Releasing the trunk lid

Press the 0.5 seconds to open the trunk lid. The trunk release button will not operate whenbutton for longer than 0.5 seconds to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is in the OFF position. See Cancel switch in this section.

 Using the panic

 Using the panic alarm

If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the than 0.5 seconds. button on the Intelligent Key for longer than 0.5 seconds.

The panic alarm and headlights will stay on for 25 seconds.

The panic alarm stops when:

- It has run for 25 seconds, or - Any button is pressed on the Intelligent Key.

- Pushing the request switch on the driver or passenger door with the Intelligent Key in range of the door handle.

 Silencing the

 Silencing the horn beep feature

If desired, the horn beep feature can be deactivated using the Intelligent Key.

To deactivate: Press and hold theand buttons for at least 2 seconds. and The hazard warning lights will flash 3 times to confirm that the horn beep featurebuttons for at least 2 seconds.

The hazard warning lights will flash 3 times to confirm that the horn beep feature has been deactivated.

To activate: Press and hold thebuttons for at least 2 seconds once and more.buttons for at least 2 seconds once more.

The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated.

Deactivating the horn beep feature does not silence the horn if the alarm is triggered.