Buick Regal: Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
To check a fuse, look at the silver-colored band inside the fuse.
If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a new one of the identical size and rating.
Fuses of the same amperage can be temporarily borrowed from another fuse location, if a fuse goes out. Replace the fuse as soon as possible.
To identify and check fuses, circuit breakers, and relays, see Engine Compartment Fuse Block and Instrument Panel Fuse Block .
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circui ...Engine Compartment Fuse Block
To remove the fuse block cover, press the three retaining clips on the cover and lift it straight up. Notice: Spilling liquid on any electrical component on the vehicle may damage it. Always keep t ...See also:
Trailer Towing
The Mazda6 is not designed for towing.
Never tow a trailer with your Mazda6. ...
Fastening seat belts
WARNING
According to accident statistics, children are
safer when properly restrained on the rear
seats than on the front-passenger seat. Thus,
we strongly recommend that children be
plac ...
Engine coolant check
Checking the coolant level
CAUTION:
Make sure that the coolant level isbetween the MIN and the MAXmarks.
Note: Coolant expands when it is hot.
The level may therefore extend beyondthe MAX mark.
T ...