Subaru Legacy: Front fog light (if equipped)
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.
1. Pull off the fender lining. Refer to “Pulling off the fender lining” F11-7.
2. Disconnect the electrical connector.
1) For left-hand side
2) For right-hand side
3. Turn the socket clockwise (right-hand side) or counterclockwise (left-hand side).
4. Pull out the socket.
5. Pull out the bulb from the socket and replace the bulb with a new one.
6. After replacing the bulb, reattach the fender lining.
Front position light
1. Turn the socket counterclockwise and pull it out. 2. Pull out the bulb from the socket and replace the bulb with a new one. ...Rear combination lights
Legacy NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. 1. Turn the knobs of the cover 90 degrees counterclockwis ...See also:
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.
When the Light Is On St ...
Adjusting the height: electrical head
restraints
Adjusting the height: electrical head
restraints
Adjusting electrically. ...
Automatic deactivation of the front
passenger airbags
The system determines whether the front passenger
seat is occupied by measuring the resistance
of the human body.
The front, knee, and side airbag on the front
passenger side are activated or d ...