Chrysler 200: Cleaning Center Console Cupholders - Maintenance Procedures - Maintaining your vehicle - Chrysler 200 Owners ManualChrysler 200: Cleaning Center Console Cupholders

Removal

Grab the rubber portion of the cupholder and lift upward.

Cleaning

Soak the rubber cupholder liner in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap.

Let soak for approximately one hour. After one hour pull the liner from the water and dip it back into the water about six times. This will loosen any remaining debris.

Rinse the liner thoroughly under warm running water.

Shake the excess water from the liner and dry the outer surfaces with a clean soft cloth.

Installation

Align the liner in the cupholder and press down firmly.

    Seat Belt Maintenance
    Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap ...

    Fuses
    ...

    See also:

    Introduction
    Your vehicle is equipped with tires according to the vehicle's tire information placard on the B-pillar (the structural member at the side of the vehicle, at the rear of the driver's door ...

    Lockout protection
    When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automa ...

    Tire ratings
    Speed ratings The speed ratings in the table translate as follow: Load ratings See page 276 for an explanation of the load rating on the sidewall of the tire. ...