Mercedes-Benz E-Class: Automatic locking feature - Doors - Opening/closing - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Automatic locking feature

The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).

You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.

•► To deactivate: press and hold button 1

•► To deactivate: press and hold button 1 for about five seconds until a tone sounds.

•► To activate: press and hold button 2 for about five seconds until a tone sounds.

i If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.

You can also switch the automatic locking function on and off using the on-board computer

    Centrally locking and unlocking the vehicle from the inside
    You can centrally lock or unlock the vehicle from the inside. The central locking/unlocking button does not lock or unlock the fuel filler flap. You cannot unlock the vehicle centrally from th ...

    Unlocking the driver's door (mechanical key)
    If the vehicle can no longer be unlocked with the SmartKey, use the mechanical key. If you use the mechanical key to unlock and open the driver's door, the anti-theft alarm system will be trigg ...

    See also:

    Glove compartment
    The glove compartment can only be locked and unlocked using the detachable key blade in the remote key. See page 59 for information on removing the key blade from the remote key. Insert the ke ...

    Certification for the smart key system
    U.S.A. FCC ID: NI4TMLF10-4 FCC ID: NI4TMLF10-5 FCC ID: HYQ23AAB FCC ID: HYQ14FBA NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ...

    Driving tips
    AMG vehicles When shifting down, the double-clutch function is active regardless of the currently selected drive program. The double-clutch function reduces load change reactions and is condu ...