Honda Accord: Auto Door Locking/Unlocking
Your vehicle has customizable settings for the doors to automatically lock and unlock. There are default settings for each of these features. You can turn off or change the settings for these features as described on the following pages.
When you customize the setting, make sure your vehicle is parked safely, the engine is off, and the parking brake is applied. Make all settings before you start driving.
U.S. V6 models, and Canadian EX-L and V6 models with navigation system
NOTE: When customizing a setting, use the appropriate remote transmitter (Driver 1 or Driver 2).
To customize, remove the master key with the remote transmitter, and press the UNLOCK button once.
Door Locks
To lock both doors, push the front of
the master door lock switch on
either door, pull the lock tab
rearward on the driver’s door, or use
the key on the outside lock on the
driver’s do ...
Auto Door Locking
The auto door locking feature has
three possible settings:
The auto door locking is
deactivated all the time.
The doors lock whenever you
move the shift lever out of the
Park (P) position (A ...
See also:
Personalised settings
You can change the settings of variousfunctions through the information display.
Unlocking the doors with theremote control
You can set the unlocking function tounlock the driver side front door onl ...
Installing child restraints using a seat belt (child restraint lock function
belt)
■ Rear facing ⎯ Infant seat/convertible seat
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint sys ...
Bulb Replacement
For the proper type of replacement bulbs, see Replacement Bulbs .
For any bulb-changing procedure not listed in this section, contact your dealer. ...
