Volvo S60: Activating/deactivating warning signals
The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on.
The audible warning signal can be activated/ deactivated by pressing MY CAR on the center console control panel and going to Settings Car settings Driver support systems Warning sound if risk of collision.
On and off
To switch Collision Warning on or off, press MY CAR on the center console control
panel and go to Settings Car settings Driver support systems Collision Warning.
If Collision Warning is on, the sy ...
Setting a warning distance
This setting determines the distance at which the visual and audible warnings
are triggered. Select Long, Normal or Short by pressing MY CAR on the center console
control panel and going to Settin ...
See also:
Radio Frequency Statement
This vehicle has systems that
operate on a radio frequency that
comply with Part 15 of the Federal
Communications Commission (FCC)
rules and with Industry Canada
Standards RSS-GEN/210/220/31 ...
Important safety notes
The use of seat belts and infant and child
restraint systems is required by law in all 50
states, the District of Columbia, the U.S.
territories and all Canadian provinces.
Even where this is no ...
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gentl ...
