Honda Accord: Winter Driving - Tires - Maintenance - Honda Accord Owners ManualHonda Accord: Winter Driving

Tires marked ‘‘M + S’’ or ‘‘All Season’’ on the sidewall have an allweather tread design suitable for most winter driving conditions.

For the best performance in snowy or icy conditions, you should install snow tires or tire chains. They may be required by local laws under certain conditions.

Snow Tires

If you mount snow tires on your vehicle, make sure they are radial tires of the same size and load range as the original tires. Mount snow tires on all four wheels. The traction provided by snow tires on dry roads may be lower than your original tires.

Check with the tire dealer for maximum speed recommendations.

Tire Chains

Mount tire chains on your tires when required by driving conditions or local laws. Install them only on the front tires.

Because your vehicle has limited tire clearance, Honda strongly recommends using the chains listed below, made by Security Chain Company (SCC).

4-cylinder models:
Cable-type:
SCC Radial Chain
SC1036

V6 models:
Cable-type:
SCC Radial Chain
SC1040

When installing chains, follow the manufacturer’s instructions, and mount them as tight as you can.

Make sure they are not contacting the brake lines or suspension. Drive slowly with them installed. If you hear them coming into contact with the body or chassis, stop and investigate. Remove them as soon as you begin driving on cleared roads.

Traction devices that are the wrong

Traction devices that are the wrong size or improperly installed can damage your vehicle’s brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle.

Using the wrong chains, or not

Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be seriously injured or killed.

Follow all instructions in this owner’s manual regarding the selection and use of tire chains.

    Wheel and Tire Specifications
    Wheels 4-cylinder models: 17 x 7 1/2J V6 models: 18 x 8J Tires 4-cylinder models: P225/50R17 93V V6 models: P235/45R18 94V ...

    Wheels
    Clean the wheels as you would the rest of the exterior. Wash them with the same solution, and rinse them thoroughly. Aluminum alloy wheels have a protective clear-coat that keeps the alumin ...

    See also:

    Engine start/stop button position
    OFF To turn off the engine, press the engine start/stop button with the engine start/stop button in the ON position and the shift lever in P(Park). When you press the engine start/stop button wit ...

    Shift position purpose
    *1: To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving. *2: Selecting shift ranges using S mode restricts the upper limit of the possible gea ...

    Brake precautions
    Vacuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. However, greater foot pressure on the br ...