Toyota Camry: When stopping the engine with the shift lever in a position other than P - Engine (ignition) switch (vehicles with a smart key system) - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: When stopping the engine with the shift lever in a position other than P

Toyota Camry / Toyota Camry Owners Manual / When driving / Driving procedures / Engine (ignition) switch (vehicles with a smart key system) / When stopping the engine with the shift lever in a position other than P

If the engine is stopped with the shift lever in a position other than P, the “ENGINE START STOP” switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following procedure to turn the switch off:

  1. Check that the parking brake is set.
  2. Shift the shift lever to P.
  3. Check that the smart key system indicator light (green) flashes slowly and then press the “ENGINE START STOP” switch once.
  4. Check that the smart key system indicator light (green) is off.
    Changing “ENGINE START STOP” switch modes
    Modes can be changed by pressing the “ENGINE START STOP” switch with brake pedal released. (The mode changes each time the switch is pressed.) Off* The emergency flashers can be used. T ...

    Auto power off function
    If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNITION ON mode (the engine is not running) for more than an hour with the shift lever in P, the “ENGINE START STOP” switc ...

    See also:

    Bottle holders
    Front Rear ■When using the holder as a bottle holder ●When storing a bottle, close the cap. ●The bottle may not be stored depending on its size or shape. CAUTION ■It ...

    New vehicle break-in driving – the first 1,000 miles (1,600 km)
    The performance and long life of your vehicle are dependent on how you handle and care for your vehicle while it is new. Follow these instructions during the first 1,000 miles (1,600 km): ● ...

    Destination guidance with traffic bulletins
    Detour suggestions from the navigation system can be manually accepted in the semi-dynamic destination guidance. In the dynamic destination guidance, they are automatically accepted in the rou ...