Mazda Mazda6: Washer Fluid - Maintenance and Care - Mazda6 Owners ManualMazda Mazda6: Washer Fluid

InspectingWasher Fluid Level

WARNING:

Use only windshield washer fluid or plain water in the reservoir:

Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.

Using Washer Fluid Without Anti-freeze Protection in Cold Weather:

Operating your vehicle in temperatures below 4 degrees C (40 degrees F) using washer fluid without anti-freeze protection is dangerous as it could cause impaired windshield vision and result in an accident. In cold weather, always use washer fluid with anti-freeze protection.

NOTE:

State or local regulations may restrict the use of volatile organic compounds (VOCs), which are commonly used as anti-freeze agents in washer fluid. A washer fluid with limited VOC content should be used only if it provides adequate freeze resistance for all regions and climates in which the vehicle will be operated.

Inspect fluid level in the washer fluid reservoir; add fluid if necessary.

Inspect fluid level in the washer fluid reservoir; add fluid if necessary.

Use plain water if washer fluid is unavailable.

But use only washer fluid in cold weather to prevent it from freezing.

    Automatic Transaxle Fluid (ATF)
    Inspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. 2.5-liter engine CAUTION: Always check the automatic ...

    Body Lubrication
    All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather. Make sur ...

    See also:

    Warning of people in danger
    If the system detects a person in the defined area in front of the vehicle and if there is the danger of a collision with this person, a warning symbol appears in the Control Display and Hea ...

    List Paired Mobile Phone Names
    • Press the button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing”. • When prompted, say “List Phones”. • The Uconnect™ Phone will pl ...

    Route guidance active
    No change of direction announced 1. Distance to the destination 2. Distance to the next change of direction 3. Current road 4. Symbol for "follow the road's course" ...