Chrysler 200: Vehicle Storage - Maintaining your vehicle - Chrysler 200 Owners ManualChrysler 200: Vehicle Storage

If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery.

• Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw).

• Or disconnect the negative cable from the battery.

• Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again.

    Totally Integrated Power Module
    The Totally Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each componen ...

    Replacement Bulbs
    All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS – Interior Bulb No. Front Courtesy/Reading Lamp . . ...

    See also:

    Turning off the accessory alarm sensors
    In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ferry where the rocking of the boat could ...

    Checking the brake pedal reserve distance
    1) More than 2.56 in (65 mm) Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure the distance between the upper surface of the pedal pad and the floor. When the me ...

    Brake fluid
    WARNING Over a period of time, the brake fluid absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in t ...