Subaru Legacy: Using a warm water washer
● Keep a good distance of 12 in (30 cm) or more between the washer nozzle and
the vehicle.
● Do not wash the same area continuously.
● If a stain will not come out easily, wash by hand. Some warm water washers are
of the high temperature, high pressure type, and they can damage or deform the resin
parts such as mouldings, or cause water to leak into the vehicle.
Washing the underbody
Chemicals, salts and gravel used for deicing road surfaces are extremely corrosive, accelerating the corrosion of underbody components, such as the exhaust system, fuel and brake lines, brake cabl ...Waxing and polishing
Always wash and dry the vehicle before waxing and polishing. Use a good quality polish and wax and apply them according to the manufacturer’s instructions. Wax or polish when the painted surface ...See also:
Drive belt
QR25DE engine
1. Power steering fluid pump pulley
2. Water pump pulley
3. Generator
4. Air conditioner
5. Crankshaft pulley
6. Drive belt Automatic tensioner
WARNING
Be sure the ignition swi ...
Vents
Center
Adjust air flow direction by moving the vent slides.
Open or close the vents by using the dial. Move the dial toward the
to open the vents or toward the
to close them.
Side ...
Installing The LATCH-Compatible Child Restraint System
We urge you to carefully follow the directions of the
manufacturer when installing your child restraint. Not all
child restraint systems will be installed as described here.
Again, carefully foll ...