Volvo S60: Turn signals
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover by pulling it straight out.
3. Pull the holder to access the bulb.
4. Press in the bulb and turn it to remove it from the holder.
5. Press and turn the new bulb into place.
6. Reinsert the bulb holder into the headlight housing.
7. Put the cover back into position and reinstall the headlight housing.
Extra high beam
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover over the bulbs (see page 308).
3. Remove the bulb by turning it counterclockwise and pulling it straight out.
...
Taillight housing
The bulbs in the taillight cluster are replaced from inside the trunk (not the
LED functions).
NOTE
Before starting to replace a bulb, see page 306.
1. Remove the covers in the left/right ...
See also:
“Connect Phone”
NOTE:
The Add Phone command is not available
when the vehicle is moving.
Use the Connect Phone commands to manage
the phones connecting to the vehicle or to enable
the Bluetooth function on the ...
Bluetooth Streaming Audio (BTSA)
Music can be streamed from your cellular phone to the
Uconnect™ phone system.
Controlling BTSA Using Radio Buttons
To get into the BTSA mode, press either “AUX” button on
the radio or pres ...
Locking and unlocking
Central locking
You can only centrally lock the doors ifthey are all closed.
Double locking
WARNINGS:
Do not activate double locking whenpersons or animals are inside thevehicle.
You will not be ...
