Chrysler 200: Towing Requirements – Tires - Towing Requirements - Trailer Towing - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Towing Requirements – Tires

• Do not attempt to tow a trailer while using a compact spare tire.

• Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “Tires – General Information” in “Starting and Operating” for proper tire inflation procedures.

• Check the trailer tires for proper tire inflation pressures before trailer usage.

• Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for proper inspection procedure.

• When replacing tires, refer to “Tires – General Information” in “Starting and Operating” for information on replacement tires and for proper tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits.

    Towing Requirements
    To promote proper break-in of your new vehicle drivetrain components the following guidelines are recommended: CAUTION! • Do not tow a trailer at all during the first 500 miles (805 km) the ne ...

    Towing Requirements – Trailer Brakes
    • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • An electronica ...

    See also:

    Defrosting or defogging the windshield
    To direct warm air to the windshield and front door windows: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Turn the temperature control dial all the way ...

    Tire Messages
    TIRE PRESSURE LOW ADD AIR TO TIRE On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low. The low ti ...

    How to Reset the Engine Oil Life System
    Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system: 1. Turn the ignition to ON/RUN with the engine off. 2. ...