Subaru Legacy: Top tether anchorages
Your vehicle is equipped with three top tether anchorages so that a child restraint system having a top tether can be installed in the rear seat. When installing a child restraint system using top tether, proceed as follows, while observing the instructions by the child restraint system manufacturer.
Since a top tether can provide additional stability by offering another connection between a child restraint system and the vehicle, we recommend that you use a top tether whenever one is required or available
Installation of child restraint systems by use of lower and tether anchorages
(LATCH)
WARNING
● Child restraint systems and seatbelts can become hot in a vehicle that has
been closed up in sunny weather; they could burn a small child. Check the child
restraint system before ...
Tether anchorage location
Legacy
Three tether anchorages are installed on the rear shelf behind the rear seat
head restraint. Open the cover flap to use each anchorage.
Outback
Three tether anchorages, i.e., ones for ...
See also:
Sway control device
Sudden maneuvers, wind gusts, and buffeting
caused by other vehicles can affect trailer handling.
Sway control devices may be used to help
control these affects. If you choose to use one,
contact ...
Checking the fluid level
WARNING
Never let clutch fluid contact your eyes because clutch fluid can be harmful
to your eyes. If clutch fluid gets in your eyes, immediately flush them thoroughly
with clean water. For safet ...
Storing wheels and tires
When storing complete wheels (tires mounted on rims), they should be suspended
off the floor or placed on their sides on the floor. Tires not mounted on rims should
be stored on their sides or sta ...
