Mercedes-Benz E-Class: Switching the ZONE function on/off - Operating the climate control system - Climate control - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Switching the ZONE function on/off

•►  To switch on: press the The indicator lamp above the button button.

The indicator lamp above the lights up. button lights up.

Dual-zone automatic climate control: the temperature setting for the driver's side is not adopted for the front-passenger side.

3-zone automatic climate control: the temperature setting for the driver's side is not adopted for the front-passenger side and the rear compartment.

When the buttons for temperature, airflow or air distribution are activated, the temperature setting for the driver's side is not adopted for the other climate control zones.

•►  To switch off: press the button. button.

The indicator lamp above the goes out. button goes out.

Dual-zone automatic climate control: the temperature setting for the driver's side is adopted for the front-passenger side.

3-zone automatic climate control: the temperature setting for the driver's side is adopted for the front-passenger side and the rear compartment.

    Setting the airflow
    Dual-zone automatic climate control •► Turn the SmartKey to position 2 in the ignition lock. •► To increase/reduce: press button 11 up or down 3-zone automatic climate control ...

    Defrosting the windshield
    You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows. You should only select the defrosting function until the windshield is clear ...

    See also:

    Universal Serial Bus (USB) memory (if so equipped)
    This system supports various USB memory sticks, USB hard drives and iPod players. There are some USB devices which may not be supported with this system. ● Make sure that the USB device is c ...

    Owner maintenance
    The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation ...

    Cleaning the sensors
    Location of the front sensors Location of the rear sensors The sensors must be cleaned regularly to ensure that they work properly. Clean them with water and a suitable car washing detergent. ...