Mercedes-Benz E-Class: Switching on/off
The steering-wheel heating heats the leather areas of the steering wheel
•► Make sure that the SmartKey is in position 2 in the ignition lock.
•► To switch on/off: turn the lever in the direction of arrow 1 or 2.
Indicator lamp 3 lights up or goes out.
The steering wheel heating may switch off temporarily if:
- the temperature of the vehicle interior is
above 86 °F (30
°C).
- the temperature of the steering wheel is
above 95 °F (35
°C).
Indicator lamp 3 remains on.
Vehicles without KEYLESS-GO: when you remove the SmartKey from the ignition lock, the steering wheel heating is deactivated.
Vehicles with KEYLESS-GO: when you switch off the ignition and open the driver's door, the steering wheel heating is deactivated.
Problems with the steering wheel heating
If steering wheel heating indicator lamp 3 is flashing, the steering wheel heating has switched off automatically. The vehicle's electrical system voltage is too low because too many electrica ...See also:
Certification for the smart key system
U.S.A.
FCC ID: NI4TMLF10-4
FCC ID: NI4TMLF10-5
FCC ID: HYQ23AAB
FCC ID: HYQ14FBA
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: ...
Switch operation
The windshield wiper and washer switch operates
when the ignition switch is placed in the ON
position.
Push the lever down to operate the wiper at the
following speed:
1 Intermittent — interm ...
Automatic transmission
•► Shift the transmission to position P.
The transmission position display in the
multifunction display shows P.
You can also start the engine when the
transmission is in position N. ...