Subaru Legacy: Stowage of the cargo area cover
The cargo area cover can be stowed in under the cargo floor.
1. To open the lid, pull the handle up.
2. To keep the lid open, hang the hook (provided on the back of the lid) on the rear edge of the roof.
3. Remove the left and right parts of the cargo floor lid.
4. Stow the cover housing in the cargo area end.
To remove the cover housing
1. Rewind the cover. 2. Hold down the button on the righthand rear quarter panel and lift up the right-hand cover housing. 3. Remove the cover housing. ...To install the cover housing
1. To install the cover housing, insert both ends of the cover housing into the retainers. 2. Make sure to fix the front part of the cargo area cover behind the rear seat. ...See also:
Power steering fluid
The fluid level should be checked using the HOT MAX range on the power steering
fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the
COLD MAX range on the power st ...
Good braking practices
WARNING
• Whenever you leave or park your vehicle, always set the parking brake as
far as possible and fully engage the vehicle's transaxle into the P (Park) position.
If the parking brake ...
ABS (Anti-lock Brake System)
WARNING
Always use the utmost care in driving – overconfidence because you are driving
with an ABS equipped vehicle could easily lead to a serious accident.
CAUTION
● The ABS system does ...