Subaru Legacy: Stopping the engine
WARNING
Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steering and braking more difficult. It could also result in accidental activation of the “LOCK” position on the ignition switch, causing the steering wheel to lock.
The ignition switch should be turned off only when the vehicle is stopped and the engine is idling.
AT and CVT models
CAUTION If you restart the engine while the vehicle is moving, shift the select lever into the “N” position. Do not attempt to place the select lever of a moving vehicle into the “P” posi ...Remote engine start system (dealer option)
WARNING ● Do not remote start a vehicle in an enclosed environment (e.g. closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of Ca ...See also:
Operating tips
-When the shift selector is shifted to the R (Reverse) position, the display
screen automatically changes to the RearView Monitor mode. However, the radio can
be heard.
- It may take some time un ...
Dual Dry Clutch (6-Speed C635 Ddct) Automatic Transmission
This vehicle must be towed with the front wheels OFF
the ground (using a flatbed truck, towing dolly, or wheel
lift equipment with the front wheels raised). The manufacturer
recommends towing yo ...
Emergency engine shut off
To shut off the engine in an emergency situation
while driving perform the following procedure:
– Rapidly push the push-button ignition switch 3
consecutive times, or
– Push and hold the push- ...