Mercedes-Benz E-Class: Shift ranges
Introduction
When the automatic transmission is in position D, it is possible to restrict or derestrict the shift range.
The shift range selected is shown in the multifunction display. The automatic transmission shifts only as far as the selected gear.
Restricting the shift range
•► Pull the left-hand steering wheel paddle shifter.
The automatic transmission shifts down one gear and restricts the shift range to the relevant gear.
If the engine exceeds the maximum engine speed when shifting down, the automatic transmission protects against engine damage by not shifting down.
If the maximum engine speed for the shift range is reached and you continue to accelerate, the automatic transmission shifts up in order to prevent the engine from overrevving, even if the shift range is restricted.
Derestricting the shift range
•► Pull the right-hand steering wheel paddle shifter.
The shift range is derestricted.
Clearing the shift range restriction
•► Pull and hold the right-hand steering wheel paddle shifter until D is shown again in the multifunction display.
The automatic transmission shifts from the current shift range directly to D.
Selecting the ideal shift range
•► Pull the left-hand steering wheel paddle shifter and hold it in position.
The automatic transmission shifts to the gear which allows optimum acceleration and deceleration. To do this, the automatic transmission shifts down one or more gears.
Automatic drive program
Drive program E (drive program C on AMG vehicles) is characterized by the following: - the vehicle pulling away more gently in forward and reverse gears, unless the accelerator pedal is d ...Manual drive program
Switching on the manual drive program The manual drive program is only available for AMG vehicles. Manual drive program M is different from drive programs S and S+ with regard to spontaneity, ...See also:
Rally bar R-Design models
Rally bar and bulkhead hatch
Vehicles with the optional R-Design package are equipped with a rally bar in
the engine compartment that must be removed before the battery can be replaced.
1. Remov ...
Removing and reinstalling clips
Removing clips
There are several types of clips used for your vehicle
Type A clips
1. Turn the clips counterclockwise using a flat-head screwdriver until the center
portion of the clip is raise ...
Maintaining/storing the speed
Press the button.
When the system is switched on, the
current speed is maintained and stored as the
desired speed.
It is displayed in the speedometer and briefly
displayed in the instrument c ...