Buick LaCrosse: Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or the 
is pressed, the
cruise control is disengaged without
erasing the set speed from memory.
Once the vehicle reaches about 40 km/h (25 mph) or more, move the thumbwheel up toward RES/+ briefly. The vehicle returns to the previous set speed and stays there.
Setting Cruise Control
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control switch off when cruise
is not being used.
1. Press to turn the cr ...
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
• Move the thumbwheel up toward
RES/+ and hold it until the
vehicle accelerates to the
desired speed, and then
release it.
• To incre ...
See also:
Automatic operation
To fully open a window equipped with automatic
operation, press the window switch down (only
driver’s side shown) to the second detent and
release it; it need not be held. The window automatica ...
Vehicle identification plate with
vehicle identification number (VIN)
and paint code number
•► Open the driver's door.
You will see vehicle identification plate 1.
Example: vehicle identification plate (USA only)
2. VIN
3. Paint code
Example: vehicle identificatio ...
Temporary Spare
A spare tire can be purchased for your vehicle as an accessory. Follow the instructions
included with the spare tire regarding use and stowing in the vehicle. See also
page 290 for additional info ...
