Subaru Legacy: Replacing an air filter
1. Remove the glove box.
(1) Open the glove box.
(2) Remove the damper shaft from the glove box.
(3) Pull out the glove box.
2. Remove the cover of the air filter.
3. Remove the air filter.
4. Replace the air filter element with a new one.
5. Reinstall the cover of the air filter.
CAUTION
The arrow mark on the filter must point UP.
6. Reinstall the glove box, and connect the damper shaft.
7. Close the glove box.
8. LABEL installation
(1) Fill out the information on the service label (small).
1) Service label
(2) Attach the service label to the driver’s side door pillar.
1) Caution label
(3) Attach the caution label on the driver’s side of the instrument panel as shown in the illustration.
Air filtration system
Your vehicle’s air conditioning system is equipped with an air filtration system.
Replace the air filter element according to the replacement schedule shown in the
following table. This schedule ...
Audio
...
See also:
Installing tire pressure warning valves and transmitters
When replacing tires or wheels, tire pressure warning valves and
transmitters must also be installed.
When new tire pressure warning valves and transmitters are
installed, new ID codes must be re ...
Important safety notes
The folding bench seat in the cargo
compartment is only approved for people
with a height no greater than 4.6 ft(1.40 m)
and max. 110 lb(50 kg) body weight.
The maximum permissible weight avail ...
Push-Starting
Do not push-start your Mazda.
WARNING:
Never tow a vehicle to start it:
Towing a vehicle to start it is dangerous. The vehicle being towed could surge
forward when its engine starts, causing the ...
