Subaru Legacy: Power steering - Starting and operating - Subaru Legacy Owners ManualSubaru Legacy: Power steering

CAUTION

Do not hold the steering wheel at the fully locked position left or right for more than 5 seconds. This may damage the power steering pump.

The power steering system operates only when the engine is running.

If you lose power steering assist because the engine stops or the system fails to function, you can steer but it will take much more effort.

NOTE

Right after the engine has been started and before it has warmed up, you may hear a noise coming from areas adjacent to the power steering pump which is located at the right-front area of the engine compartment. This noise is normal. It does not indicate power steering system trouble.

    Driving tips
    ● On a road surface where there is a risk of wheelspin (for example, a snow- or gravel-covered road), you can pull away from a standstill safely and easily by first selecting the 2nd gear of ...

    Braking
    ...

    See also:

    Engine specifications
    ...

    Removing a headlamp
    1. Open the bonnet. See Opening andclosing the bonnet. 2. Remove the screws. CAUTION: Do not pull the bumper more than 10mm from its original position. 3. Carefully pull the bumper towards the ...

    Air intake control
    This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator lig ...